Parrilla & Charcoal

Asado de Tira (Short Ribs) on a Santa Maria Grill: Bone Side, Salt and Height

ByJohn White
Cook asado de tira on a Santa Maria grill with the bone side, coarse salt, and a mid-cook height change, then slice across the bone to serve.
Share

The failure that usually starts this cook is a flare: fat from a strip of short rib hits a hard fire, the meat-side scorches, and the bone side never had a chance to shield anything. Asado de tira on a Santa Maria grill is an implementation problem more than a sauce problem. Bone orientation, coarse salt, and a planned height change are the path. Sweet glaze is not.

This page is a tira method for an adjustable grate. It is not a US pork-rib walkthrough. The live gas-grill rib page keeps that meat and that low-heat idea. Height control already has its own guide; this article will use it, not reteach it.

What asado de tira is, and how it is cut

Asado de tira is beef short rib cut across the bone into strips, the flanken style, so each piece shows several small bone sections. In a US case it may say flanken, cross-cut short ribs, or tira. Buy a strip you can salt and turn, not a stew cube or an English-cut plate.

The cut is fatty and bony on purpose. That fat is the cook. If you buy a very lean, closely trimmed flanken, the plate will be drier and the flare risk lower, but you will also lose the asado character that makes tira worth lighting a fire for. Look at the bones and the seams of fat before you pay, and ask the butcher to cut across the bone if the only ribs in the case are English-cut.

This is beef. Pork spare ribs and baby backs are a different product, even when they sit in the next cooler. Keep them on their own method.

Bone side, coarse salt and a starting grate height

Salt the tira with coarse salt and give it time to take, on a dry surface, without a wet rub. Start the pieces bone-side toward the fire, or with the bones as a first shield, on a grate height that is not already kissing the coals. The first job is to melt fat without turning the meat face into a flare casualty.

If your fire is still raging, wait or start higher. A Santa Maria or parrilla-style cooker lets you change that distance; that is the reason to use this grill for tira instead of a fixed, close grate. For cooker differences, see Argentine parrilla versus Santa Maria grill.

Stay with the fire for the first drips. The failure happens early, when no one is holding the handle yet. For grease and open-fire awareness, use NFPA grilling safety and U.S. Fire Administration cooking-fire prevention.

A cook using spring handles to raise a grate on a Big Horn portable Santa Maria style charcoal grill, with steaks and sausages on the lower grate and vegetables on upper grates in a backyard
Height is the mid-cook control for tira. Raise the grate when fat starts to flare; lower it when you want more color.

A height-change plan mid-cook

Plan a height change, then make it when the food tells you to, not when a timer goes off. If the fat is rendering and the fire is calm, you can lower the grate for color. If drips are flaring or the surface is darkening too fast, raise it. The live page on Santa Maria grill grate height by food already owns the broader height logic. This article only applies it to tira: start safer, then move.

Turn the strips so both faces and the edges see heat. A bony, fatty strip has more than two sides in practice. Do not leave the same face in a flare while you talk. A portable cooker such as the portable Santa Maria style charcoal grill still has that height move; use the handles, and keep gloves in reach.

Fuel choice changes how jumpy the fire is. For charcoal versus hardwood, use which fire to use in a Santa Maria grill and charcoal versus wood for fuel, flavor, and control. This method does not pick a single fuel for you, and it does not invent a pyramid of lump charcoal as a lab result.

Doneness cues for a fatty, bony cut

Tira is done when the fat has rendered and softened, the surface has color, and the meat has pulled a little from the bone without collapsing off it. A waxy, opaque fat seam means it is early. A bitter, black edge with cold fat inside means the fire was too close, too soon.

If you use a thermometer, probe the thickest meat, not the bone. The FDA safe food-handling chart lists 145°F, with a three-minute rest, for beef steaks, chops, and roasts. Short rib is fattier than a lean steak, and many cooks take it further so the fat actually melts. Use the official minimum as the floor, then let rendered fat, not a guess at “fall off the bone,” tell you when to pull.

There is no single minute count that survives every fire, every strip thickness, and every wood or charcoal bed. Watch the cut. For boards and raw-to-cooked habits, use the FDA kitchen food-safety page.

Stage What you do What you are watching
Salt and start Coarse salt, bone side toward the fire, a safer starting height First drips, not an immediate hard char on the meat face
Mid-cook move Turn, then raise or lower the grate Flare, color, and whether fat is still waxy
Pull Take the strips off when fat has softened and the meat has color A little pull from the bone, not a shredded, dried rib
Rest and slice Rest, then cut across the bone line for a tidy plate A clean board, and salsa or a simple relish at the table

How this differs from US pork-rib methods

US pork spare ribs and baby backs are usually a longer, often sweeter, sometimes covered or low-heat cook, with a fall-off-the-bone idea that many backyard recipes chase. The live page on a low-heat gas-grill method for pork ribs owns that path. Asado de tira is beef, salted simply, cooked over live fire with height changes, and served with the bone still doing structural work.

Do not import a sticky barbecue glaze at the start of a tira cook. Sugar will burn in a flare long before the fat has rendered. If you want a sauce, put it on the table. Do not import a two-hour closed-lid pork schedule onto a Santa Maria grate and call the result asado.

You can serve both meats at the same party. You just should not cook them with the same mental model.

Slicing and serving with salsa

Rest the tira so the juices settle, then serve the strips as they are, or cut them into shorter lengths that still show the bones. A simple salsa, a chopped herb relish, or a bowl of chimichurri at the table is enough. The meat should already taste like salt, beef, and fire.

If you slice, cut so each piece still has a bone section and a bite of rendered meat, rather than scraping the beef off the bone in the kitchen. Part of the plate is the bone. Give people a place to put it.

Keep raw and cooked tools apart, and do not use the marinade bowl, if you made one, as a serving bowl unless you have boiled that liquid. This cut is usually salted dry, which makes that problem easier to avoid.

Portable Big Horn Santa Maria style charcoal grill with steaks and vegetables on round grates and two whole chickens on a spit above the fire, shown on a white background
The photo shows the same portable Santa Maria style grill this method uses. Tira belongs on the grate, with height changes, not on a spit.

A rest and a cut across the bone that keeps the plate tidy

After the rest, cut across the line of bones so you get neat, short sections rather than a long, floppy strip that sheds fat on the way to the table. That cross cut is presentation and control: each person gets a manageable piece, and the cutting board does not become a puddle.

If some sections are more done than others, serve the more rendered pieces first and give a slightly paler section a moment more on a raised grate. The cook does not have to end in a single theatrical pull if the tray was uneven.

Leftovers chill on the timeline in the FDA advice on storing food safely. Reheat gently later; tira does not need a second hard fire to be useful the next day.

A recap of who this method is for, and who should use a different cooker

This method is for someone with a Santa Maria or parrilla-style grill and a tray of flanken-cut beef short ribs, who can stand at the fire and move the grate. It is a good asado course when you want a bony, salty plate and you are willing to manage flare.

If you only have a covered gas grill and a rack of pork ribs, use the pork-rib page. If you wanted a set-and-forget smoker, tira on an open adjustable grate will feel like too much work, and that is a fair reason to pick another cut. Keep the fire outdoors, and see Ready.gov home-fire guidance if you are tempted to drag a lit cooker out of the wind and into a half-closed garage.

If you need an adjustable-grate cooker for this tira method, look at a unit such as the portable Santa Maria style charcoal grill, and use grate height, not a sweet glaze, to finish the short ribs.

FAQ

What is asado de tira, and how is it cut?

Asado de tira is beef short rib cut across the bone into strips, the flanken style, so each piece shows several small bone sections rather than one long English-cut bone. In a US shop it may be labeled flanken, cross-cut short ribs, or tira. It is not a rack of pork spare ribs or baby backs, and it is not a boneless stew cut. The cook on a Santa Maria grill is about rendering the fat around those bones, with coarse salt and grate height, not about a sweet American barbecue glaze.

Should asado de tira start bone-side toward the fire?

Starting with the bone side toward the fire, or at least with the bones as a shield against the first hard heat, is the usual way to keep the fat and meat from scorching before they render. Then you turn, and you change grate height as the drips and color tell you to. This is a starting habit, not a law for every fire. If the pieces are already flaring, raise the grate rather than leaving the meat-side down in a flare pit.

How do you know when short ribs on a Santa Maria grill are done?

Look for rendered, softened fat, a browned surface, and meat that has pulled a little from the bone without falling off it. Probe the thickest meat, not the bone, if you use a thermometer. The FDA chart lists 145°F, with a three-minute rest, for beef steaks, chops, and roasts; short rib is a bony, fatty cut, and many cooks take it a little further so the fat has actually melted. These are cues, not a minute count from one grill. If the surface is already bitter and the interior is still waxy with cold fat, the height plan failed earlier, not at the last second.

Is asado de tira the same as U.S. pork spare ribs?

No. Asado de tira is beef, cut flanken-style across the bone. US pork spare ribs or baby backs are a different animal, usually cooked with a longer, sweeter, often covered or low-heat method. The live gas-grill pork-rib page on this site owns that pork method. You can serve both at a party, but you should not copy a fall-off-the-bone pork schedule onto tira, or a coarse-salt asado onto a rack of baby backs, and expect the same plate.

More to Read

Parties Leftover Holiday Turkey on the Grill or in the Pizza Oven: Sandwiches, Tostadas and a White Pie Give leftover turkey a second heat, not another roast: grill sandwiches or tostadas, or bake a white pie, after a safe leftover inventory the night... Parties Parrilla Taco Night: Carne, Salsas and Grate Space for a Crowd Run taco night on a parrilla as a grate-space plan: carne, a second protein, a salsa station, and tortillas held soft, without one crowded fire. Parties Bone-In Lamb Leg or Shoulder on a Santa Maria or Gas Grill Grill a bone-in lamb leg or shoulder as a roast: Santa Maria height or a gas two-zone fire, a USDA safety floor, and a probe that does not touch bone.